Citizen CT-D150 - Page 394

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 393 -
[Caution] [The specification which is common to the model]
• This command is only valid when processed at the head of a line during the STANDARD MODE.
• The command will be ignored in PAGE MODE.
• During macro definition, if this command is processed, the macro definition is suspended, and the command
starts being processed.
• Printer will reset its hard disk after finishing test printing. Therefore, the printer makes download characters, bit
map images and macros undefined, clears the reception buffer/print buffer, and returns the various settings
to defaults. At this time, the DIP switches are read again.
• Paper cutting is performed at the end of test printing.
*Functions with cutter-mounted model and when cutter is set to be enabled.
• Printer will be BUSY when the processing of the command starts.