Citizen CT-D150 - Page 466

- 465 -
●MSW1-3: Busy condition
[Outline] Select the condition that printer is BUSY. Automatic status send function also runs.
OFF(0)
ON(1)
Busy Condition
Buffer full/Off-line
Buffer full
ON (1) OPERATION: If receive buffer is full, printer is BUSY.
Automatic status send (ASB) function is enabled.
OFF (0) OPERATION: If receive buffer is full or off-line, printer is BUSY.
Automatic status send (ASB) function is disabled.
[Additional Description]
Even if ON is selected, printer enters BUSY status when power is turned on or reset by I/F or at self test print
Printer Status
MSW1-3
OFF
MSW1-3
ON
Off-line
Power-up or reset used by I/F
●
●
Self-print
●
●
Cover open
●
-
Paper-feed by FEED SW
●
-
Paper-end (including print stop in PNE)
●
-
Error generation
●
-
Waiting during macro run by FEED SW
●
-
Buffer full
Receive buffer full
●
●
●MSW1-4: Receive error character
[Outline] Select handling of data detected where the serial communication detects the receive data framing error,
overrun error and parity error.
OFF(0)
ON(1)
Receive Error
Print ?
No Print
ON (1) OPERATION: Not printed as “?”
OFF (0) OPERATION: Printed as “?”