Citizen CT-D150 - Page 475

- 474 -
●MSW4-3: Paper feed & cut at closing cover
[Outline] When cover is closed, printer feeds paper and cuts.
OFF(0)
ON(1)
Feed & Cut at TOF
Invalid
Valid
ON (1) OPERATION: Paper feed & cut at closing cover is enabled.
OFF (0) OPERATION: Paper feed & cut at closing cover is disabled.
●MSW4-4: Paper
[Outline] Selects the type of paper used.
OFF(0)
ON(1)
Paper
Thermal roll paper
Black mark paper/Label paper
ON (1) OPERATION: Paper used is limited to black mark paper or label paper.
OFF (0) OPERATION: Paper used is limited to thermal roll paper.
●MSW4-5: Position detect
[Outline] Selects the method of detecting paper position.
OFF(0)
ON(1)
Position detect
Black mark
Label
ON (1) OPERATION: Detects paper position by detecting the inter-label distance.
OFF (0) OPERATION: Detects the paper position by detecting the black mark.
*This function is valid only with black mark specification or label specification.
*If thermal roll paper is selected by MSW4-4, this function is invalid.
*Black mark detection is fixed with black mark specification.
●MSW4-6： Paper Change
[Outline] On label models or black mark models, auto length measurement can be performed at cover close for
using different paper. This memory switch sets this function enabled or disabled.
OFF(0)
ON(1)
Paper Change
Invalid
Valid
ON (1) OPERATION: Auto length measurement is done at cover close.
OFF (0) OPERATION: Auto length measurement is NOT done at cover close.