18
17
Switch on & off
Change Weighing Unit
Switch References
Print Weighing Results
Calibrate (adjust)
Call Menu
Weighing mode (operation)
Press briefly Press & Hold
Confirm Setting
Tare
Confirm Reference Setting
Abort / Cancel and Footer
when GLP is ON
On / Off key
Toggling key
Tare keyCancel / Footer
Print key
CAL /
Menu key
Key Functionality in simple weighing mode
Citizen balances have several control levels the following section
explains key functionality in simple weighing mode.
Short-form operating Instructions
Press key briefly
Press and hold key until
desired display appears
Automatic procedure
Connect DC Adaptor and Power ON the balance.
– It will display version number for software
– It will display numeric countdown
– It will display 88888888
– The system initialization process will begin with the display indicating the current
progress. (INIT 1% to INIT 100%)
– After the initialization is complete (100%) It will enter stand by mode &
display clock.
Stand by Mode
– After Power ON and initial test balance will automatically come in stand by mode.
– Press ON / OFF key to come to basic weighing
– Press ON / OFF key in basic weighing to come back to Stand by Mode
3. Power ON
To Next Page
Loading...
Need help?
General
