16
15
2
11
10
12
13
8
9
3
4
17
14
15
16
5
2
7
18
1 6
1 On/Off key: Switches the display on / off
2 Tare key: Press here to tare the weight of any container so
that the readout shows the net weight of samples, also used
to store reference settings. This key used to delete the
statistics when F StAt mode.
3 Cancel Function : Delete (Clear Function) This key is
generally used to interrupt/cancel functions; for example: –
to end an application program
– to interrupt calibration/ adjustment routines
4 Toggle Key : Press here to change the Unit, Also used to
increment digit.
5 Cal Menu Function : Press here to start calibration/
adjustment or to enter user menu, Also use to shift flashing
digit from left to right. this key is used in the F PiP mode to
accept the volume during the calibration procedure.
6 Print Key : Press this key to send displayed values over the
built-in data interface to a DataPrint printer or a PC.
7 Weight Units
8 Weight readout in the selected weight unit
9 Capacity Bar : This indicates the total amount of
weight on the Pan
10 Stability Symbol : This symbol is displayed when the
weight place on the pan achieve stability
11 Asterik Symbol : This Symbol is displayed when the
display is locked
12 Stability Filer : This symbol indicates the chosen stability
filter
13 Symbol indicating that the Auto / Manual
calibration/adjustment function is active
14 Symbol indicating the active program
15 Battery Level Indicator : This symbol is indicates the
Current charge of the battery
16 Symbol indicating that a printout is being generated
17 Symbol indicating that a GLP compliant printout is
being generated
18 Seven segment readout indicating the active
program
2.3 Keys of Balance
To Next Page
Loading...
Need help?
General
