7.1.2 SET DATE
ð Press TARE key, “date” is display
ð Press TARE key, current date is displayed with first digit flashing. Flashing digit indicates
that digit value or place can be changed.
ð Press TOGGLE key ( ) to change the value of the Flashing digit.
ð Press CAL key ( ) to shift the flashing digit from Left to Right
ð After proper setting of date in day, month & year respectively for zeroes starting from left,
ð Press TARE key to set the date
In this menu user can set the identification number & Lot Identification number.
Operating Instructions
ð Press the PRINT key briefly when coming out from stand by or Power on mode.
7.2.1 SET ID
ð Last stored ID is displayed with first digit flashing. Flashing digit indicates that digit
value or place can be changed.
ð Press TOGGLE key ( ) to change the value of the Flashing digit.
ð Press CAL key ( ) to shift the flashing digit from Left to Right
ð Press the TARE key to store ID Value
7.2.2 SET LID
ð Last stored LID is displayed with first digit flashing. Flashing digit indicates that digit
value or place can be changed.
ð Press TOGGLE key ( ) to change the value of the Flashing digit.
ð Press CAL key ( ) to shift the flashing digit from Left to Right
ð Press the TARE key to store LID Value
97
98
7.2 ID / LID Setting
To Next Page
Loading...
Need help?
General
