Citrix NetScaler MPX User Manual

© 1999-2017 Citrix Systems, Inc. All rights reserved. p.17https://docs.citrix.com
Selecting a Location for the Appliance
Jul 15, 2013
When selecting where to put the NetScaler Gateway appliance, consider the following:
Leave enough clearance in front of the rack so that you can access the LCD and various ports on the front panel of the
appliance.
Leave approximately 30 inches of clearance in the back of the rack to allow for sufficient airflow and easy servicing.
Install the NetScaler Gateway appliance in a restricted area, such as a dedicated lab or service closet.
Ground the rack to ensure that a reliable ground is maintained at all times.
Leave enough clearance in front of the rack to enable you to open the front bezel completely.

Citrix NetScaler MPX Specifications

General

Category	Gateway
Throughput	Varies by model
SSL Transactions per Second	Varies by model
Concurrent Users	Varies by model
SSL Throughput	Varies by model
Compression Throughput	Varies by model
Max SSL Transactions Per Second	Varies by model
Max Concurrent Connections	Varies by model
Redundancy	Yes (HA configurations available)