Citrix NetScaler MPX User Manual

© 1999-2017 Citrix Systems, Inc. All rights reserved. p.49https://docs.citrix.com
4. Click Add.
5. Verify that Network Adapter (not connected) appears in the left pane.
6. Select the network adapter in the left pane.
7. In the right pane, from the Network drop-down list, select the virtual network to connect the adapter to.
8. To select the virtual network for additional network adapters that you want to use, repeat steps 6 and 7.
9. Click Apply, and then click OK.
To configure NetScaler Gateway VPX
1. Right-click the virtual appliance that you previously installed and then click Start.
2. Access the console by double-clicking the virtual appliance.
3. Type the NetScaler Gateway IP address, subnet mask, and default gateway for your virtual appliance.
You have completed the basic configuration of your virtual appliance. Type the IP address in a Web browser to access the
configuration utility for the virtual appliance.

Citrix NetScaler MPX Specifications

General

Category	Gateway
Throughput	Varies by model
SSL Transactions per Second	Varies by model
Concurrent Users	Varies by model
SSL Throughput	Varies by model
Compression Throughput	Varies by model
Max SSL Transactions Per Second	Varies by model
Max Concurrent Connections	Varies by model
Redundancy	Yes (HA configurations available)