© 1999-2017 Citrix Systems, Inc. All rights reserved. p.251https://docs.citrix.com
5. Click OK. Connection to the Management Service is lost as the network information was changed.
6. Connect the NetScaler SDX appliance’s management port 0/1 to a switch to access it through the network. Browse to
the IP address used above and log on with the default credentials.
1. Apply the new licenses. For instructions, see NetScaler SDX Licensing Overview.
Navigate to Configuration > System and, in the System Administration group, click Reboot Appliance. Click Yes to
confirm. You are now ready to provision the VPX instances on the NetScaler SDX appliance. For instructions,
see Provisioning NetScaler Instances.
To Next Page
Loading...
