© 1999-2017 Citrix Systems, Inc. All rights reserved. p.256https://docs.citrix.com
hardware
Example
> show hardware
Platform: NSMPX-14000-40G 12*CPU+16*F1X+4*F4X+2*E1K+2*CVM N3 250140
Manufactured on: 3/21/2016
CPU: 2600MHZ
Host Id: 234913926
Serial no: KZCHGCN810
Encoded serial no: KZCHGCN810
Done
>
The serial number might be helpful in the event that you want to contact Citrix Technical Support.
3. Run the following command to display the status of the active interfaces:
show interface
Example
> show interface
1) Interface 0/1 (Gig Ethernet 10/100/1000 MBits) #10
flags=0xc020 <ENABLED, UP, UP, autoneg, HAMON, 802.1q>
MTU=1500, native vlan=1, MAC=0c:c4:7a:41:ea:94, uptime 43h59m55s
Requested: media AUTO, speed AUTO, duplex AUTO, fctl OFF,
throughput 0
Actual: media UTP, speed 1000, duplex FULL, fctl OFF, throughput 1000
LLDP Mode: NONE
RX: Pkts(44337150) Bytes(2767558041) Errs(0) Drops(41260552) Stalls(0)
TX: Pkts(128116) Bytes(9004699) Errs(0) Drops(0) Stalls(0)
NIC: InDisc(0) OutDisc(0) Fctls(0) Stalls(0) Hangs(0) Muted(0)
To Next Page
Loading...
