© 1999-2017 Citrix Systems, Inc. All rights reserved. p.297https://docs.citrix.com
Note: The output of the command is available in the /var/tmp/support/collector_<IP_address>_P_<date>.tar.gz file. Copy
this file to another computer for future reference. The output of the command might be helpful in the event that you
want to contact Citrix Technical Support.
8. At the NetScaler command line interface, switch to the shell prompt. Type: shell
Example
> shell
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
9. Run the following command to verify the number of Cavium cards available depending upon your appliance:
root@ns# grep "cavium" /var/nslog/dmesg.boot
Example
root@ns#
root@ns# grep "cavium" /var/nslog/dmesg.boot
Cavium cavium_probe : found card 0x177d,device=0x11
cavium0 mem 0xde200000-0xde2fffff irq 32 at device 0.0 on pci3
cavium0: [ITHREAD]
Cavium cavium_probe : found card 0x177d,device=0x11
cavium1 mem 0xfb400000-0xfb4fffff irq 64 at device 0.0 on pci136
cavium1: [ITHREAD]
Cavium cavium_probe : found card 0x177d,device=0x11
cavium0 mem 0xde200000-0xde2fffff irq 32 at device 0.0 on pci3
cavium0: [ITHREAD]
Cavium cavium_probe : found card 0x177d,device=0x11
cavium1 mem 0xfb400000-0xfb4fffff irq 64 at device 0.0 on pci136
cavium1: [ITHREAD]
root@ns#
To Next Page
Loading...
