© 1999-2017 Citrix Systems, Inc. All rights reserved. p.38https://docs.citrix.com
Citrix NetScaler SDX 14020, SDX 14030, SDX 14040,
SDX 14060, SDX 14080 and SDX 14100
Dec 22, 2016
The Citrix NetScaler SDX 14020/14030/14040/14060/14080/14100 are 2U appliances. Each model has two 6-core processors and 64 gigabytes (GB) of memory
and sixteen 10G SFP+ ports (16x10G SFP+).
Note: For information about NetScaler SDX hardware and component compatibility matrix, see https://docs.citrix.com/en-us/sdx/11/sdx-ag-supported-versions-
ref.html.
The following figure shows the front panel of the SDX 14020/14030/14040/14060/14080/ 14100 ( 16x10G SFP+) appliance.
Figure 1. Citrix NetScaler SDX 14020/14030/14040/14060/14080/14100 ( 16x10G SFP+), front panel
The NetScaler SDX 14020/14030/14040/14060/14080/14100 appliances have the following ports:
RS232 serial Console Port.
10/100Base-T copper Ethernet Port (RJ45), also called the LOM port. You can use this port to remotely monitor and
manage the appliance independently of the NetScaler software.
Two 10/100/1000Base-T copper Ethernet Management Ports (RJ45), numbered 0/1 and 0/2 from left to right. These
ports are used to connect directly to the appliance for system administration functions.
Network Ports, sixteen 10G SFP+ ports ( 16x10G SFP+).
Not e:Not e: T he 10G SFP+ ports on these appliances support copper 1G SFP transceivers.
The following figure shows the back panel of the SDX 14020/14030/14040/14060/14080/ 14100 appliance.
Figure 2. Cit rix Net Scaler SDX 14 020/14 030/14 04 0/14 060/14 080/14 100, back panelFigure 2. Cit rix Net Scaler SDX 14 020/14 030/14 04 0/14 060/14 080/14 100, back panel
To Next Page
Loading...
