© 1999-2017 Citrix Systems, Inc. All rights reserved. p.40https://docs.citrix.com
Citrix NetScaler SDX 14020 40G, SDX 14040 40G, SDX
14060 40G, SDX 14080 40G, SDX 14100 40G
Mar 24, 2016
The Citrix NetScaler SDX 14020 40G, SDX 14040 40G, SDX 14060 40G, SDX 14080 40G, and SDX 14100 40G are 2U
appliances. Each model has two 6-core processors and 64 gigabytes (GB) of memory. The SDX 14020 40G, 14040 40G, SDX
14060 40G, SDX 14080 40G, and SDX 14100 40G appliances are available in the four 40G QSFP+ ports and sixteen 10G
SFP+ ports (4x40G QSFP+ + 16x10G SFP+) configuration.
The following figure shows the front panel of the SDX 14020 40G, SDX 14040 40G, SDX 14060 40G, SDX 14080 40G
(4x40G QSFP+ + 16x10G SFP+) appliance.
Figure 1. Citrix NetScaler SDX 14020 40G, SDX 14040 40G, SDX 14060 40G, SDX 14080 40G (4x40G QSFP+ + 16x10G SFP+),
front panel
The NetScaler SDX 14020 40G, SDX 14040 40G, SDX 14060 40G, SDX 14080 40G appliances have the following ports:
RS232 serial Console Port.
10/100Base-T copper Ethernet Port (RJ45), also called the LOM port. You can usethis port to remotely monitor and
manage the appliance independently of the NetScaler software.
Two 10/100/1000Base-T copper Ethernet Management Ports (RJ45), numbered 0/1and 0/2 from left to right. These
ports are used to connect directly to the appliancefor system administration functions.
Network Ports, four 40G QSFP+ ports and sixteen 10G SFP+ ports (4x40G QSFP+ + 16x10G SFP+).
Note the following points regarding the network ports on SDX 14020 40G, SDX 14040 40G, SDX 14060 40G, SDX
14080 40G appliances:
o 10G ports do not support 1G copper or 1G fiber transceivers.
o 40G ports do not support 10G and 1G transceivers.
The following figure shows the back panel of the SDX 14020 40G, SDX 14040 40G, SDX 14060 40G, SDX 14080 40G
To Next Page
Loading...
Need help?
General
