© 1999-2017 Citrix Systems, Inc. All rights reserved. p.403https://docs.citrix.com
Id is system generated key for all the NetScaler Instances
Top
add ns
Synopsis
add ns ip_address=<ipaddress> [gateway=<ipaddress>] [l2_enabled=(false | true)] [nsvlan_interfaces=<string...>] [pps=
<doublelong>] [throughput=<doublelong>] [la_mgmt=(false | true)] [nsvlan_tagged=(false | true)] [license=<string>]
[username=<string>] [cmd_policy=<string>] [name=<string>] [number_of_cores=<int>] [vlan_id_0_1=<int>] [if_0_1=(false |
true)] [netmask=<ipaddress>] [vlan_id_0_2=<int>] [description=<string>] [if_0_2=(false | true)] [network_interfaces=
<network_interface...>] [reboot_vm_on_cpu_change=(false | true)] [vlan_type=<int>] [xva_file_name=<string>] [password=
<stringx>] [vm_memory_total=<doublelong>] [nsvlan_id=<int>]
Description
Use this operation to add NetScaler Instance
Parameters
ip_address
IP Address for this managed device
This is a mandatory parameter.
gateway
Default Gateway of managed device
l2_enabled
L2mode status of VM Instance
nsvlan_interfaces
VLAN Interfaces
pps
Assign packets per seconds to NetScaler Instance
throughput
Assign throughput in Mbps to VM Instance
la_mgmt
Bond consisting of management ports on VM Instance
nsvlan_tagged
NSVLAN Tagged
license
Feature License for NetScaler Instance, needs to be set while provisioning (standard, enterprise, platinum)
username
User Name (except nsroot) to be configured on NetScaler Instance
To Next Page
Loading...
