130
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engine : NFU
B1BP2MAC
Checking the timing (continued)
Engine : NFU
Place a jack under the engine, peg the engine.
Remove:
- The engine support (4) complete.
- The timing casing (3).
- The sparking plugs (eases engine rotation).
Turn the wheel to rotate the engine (normal direction of rotation).
Position the pegs [3a] and [3b].
Peg the flywheel, using tool [1].
If the setting is not correct, recommence the operation.
Remove the tools [1], [2], [3a] and [3b].
Complete the refitting.
B1BP2MBC
B1EP18MC
C3
To Next Page
Loading...
