252
INJECTION
FITTING DELPHI DIESEL INJECTORS
Engine : WJY
B1DP158C B1HP12VC
B1HP0YGC
Fitting an injector
The copper seal (1) and the fire
seal washer (3) are to be replaced
each time they are removed.
NOTE : Fitting parts of different
makes is PROHIBITED.
WARNING : Ensure that the
fire seal washer (3) is fitted the
right way round.
Tighten the injector holder
on the cylinder head to :
9 m.daN
[1] Tool to remove/refit injectors (2) 7007-T
[2] 7008-T.A Tool kit 4123-T
(3) Tighten lightly to prevent any distortion.
XSARA