33
CAPACITIES (in litres)ALL TYPES
Draining method.
The oil capacities are defined according to the following methods.
1/ Vehicle on level surface (in high position, if equipped with hydropneumatic suspension).
2/ Engine warm (oil temperature 80°C).
3/ Draining of the oil sump + removal of the cartridge (duration of draining + dripping = 15 min).
4/ Refit plug + cartridge.
5/ Engine filling.
6/ Engine starting (allowing the cartridge to be filled).
7/ Engine stopped (stationary for 5 min).
ESSENTIAL : Systematically check the oil level using the oil dipstick.
GENERAL
To Next Page
Loading...
