136
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engines : KFX - KFV - NFU
Setting the timing (continued)
Engines: HFX-KFV
Refitting.
NOTE : Check that the pegs [1] and [2] are in place.
WARNING: Respect the direction of fitting of the timing belt, the arrows «d» indicate the direction of rotation
of the crankshaft.
Refit the timing belt.
Position the timing belt, belt «e» well tensioned, in the following order:
Crankshaft pinion, hold the belt using tool [5].
- Camshaft pulley.
- Coolant pump pulley.
- Tensioner roller.
Remove the tools [1], [2]
Engine: NFU
Fit the timing belt in position in the following order:
- Inlet camshaft pulley.
- Exhaust camshaft pulley.
- Guide roller.
- Crankshaft pulley.
Position tool [5].
- Coolant pump pulley.
- Dynamic tensioner roller.
Remove the tools [1], [3] and [5].
B1EP18RC
C3
To Next Page
Loading...
