ENGINE
181
CHECKING AND SETTING THE VALVE TIMING
Engines : 6FZ - RFN 2003 #
Refitting (continued)
Remove the tools [1] and [2].
Rotate the crankshaft ten times
(normal direction of rotation).
IMPERATIVE : No pressure or outside force should be brought to bear on the timing belt.
Peg the inlet camshaft pulley, using tool [1].
Checks.
Tension of the timing belt.
ESSENTIAL : Check the position of the index « a », which should be opposite the slot « g ».
If the position of the index « a » is not correct, repeat the operations to tension the timing belt.
Refit the upper timing cover (1).
Clip the fuel delivery hose on the timing cover.
Refit the accessories drive belt (See corresponding operation).
Lower the vehicle.
Reconnect the battery (See corresponding operation).
B1EP1BEC
B1EP1BFC
XSARA - XSARA PICASSO
To Next Page
Loading...
