401
BRAKES
BRAKE SPECIFICATIONS
Electrical circuit
Components
Ref.
Supplier
Part No.
Observations
42-way connector.
Alone on the hydraulic block.
Changing only the ECU is prohibited.
2-way grey connector.
The sensors are inductive-type.
Tightening torque: 0,8 ± 0,2 m.daN
2-way grey connector.
The sensors are inductive-type.
Mounted on the brake caliper support.
Non-adjustable airgap: 0,3 to 1,2 mm.
Tightening torque: 0.8 ± 0.2 m.daN
2-way grey connector.
The sensors are inductive-type.
Mounted on the suspension arm.
Non-adjustable airgap: 0,3 to 1,2 mm.
Tightening torque: 0,8 ± 0,2 m.daN.
Incorporated in the COM 2000.
6-way blue connector.
Located on the central console.
6-way connector.
Toothed wheel: 48 teeth.
Integral with the driveshaft stub housing for
the front wheels, joined to the hub bearing for
the rear wheels.
XSARA - All Types
5.7 ESP
0 265 006 389
0 265 006 202
0 265 006 203
0 265 006 441
BOSCH
VALEO
BOSCH
GKN
Electronic ECU
Front wheel sensor
Rear wheel sensor
(disc brakes)
Rear wheel sensor
(Saloon : drum brakes)
Rear wheel sensor
(Estate : drum brakes)
Steering angle sensor
Gyrometer/accelerometer sensor
Toothed wheel
7
5
12
13
4
To Next Page
Loading...
