135
ENGINES
SPECIAL FEATURES: TIGHTENING TORQUES
Cylinder head
5 Camshaft bearing cap cover screws (*) 1 ± 0,1
6 Coolant outlet housing fixing 2 ± 0,2
Camshaft bearing cap cover studs (*)
7 Pre-tightening (the 26 screws Ø 6) 0,5
Tightening (the 26 screws Ø 6) 1 ± 0,1
8 Inlet valve cover screws (*) (19 screws) 0,9 ± 0,1
Engine: RHR
B1DP1LCP
To Next Page