370
BRAKES
HANDBRAKE ADJUSTMENT
Adjustment.
IMPERATIVE: Respect the safety and cleanliness requirements.
Raise and support the vehicle.
Remove the central console.
WARNING: Check the routing of the brake cables under the vehicle.
Release the handbrake lever.
Press gently on the brake pedal (then repeat the operation 3 times).
Action the handbrake lever 8 times with a force of 40 daN.
Use a feeler gauge at «J» to measure the movement of the lever in relation to its stop.
NOTE: The movement should be less than 1,5 mm and more than 0,05 mm.
(1) Nut for adjusting the tension of the handbrake cables.
Move the nut (1) to obtain a movement «J» less than or equal to 1,5 mm.
Action the handbrake lever 8 times with a force of 40 daN.
With the handbrake released, check the movement «j» with a feeler gauge.
NOTE: The movement should be less than 1,5 mm and more than 0,05 mm.
Refit the central console (see corresponding operation).
Check the efficiency of the handbrake.
B3FP7F1C
B3FP7F2D
To Next Page
Loading...
