315
CLUTCH
GEARBOX
DRIVESHAFTS
RECOMMANDATIONS - PRECAUTIONS ( AL4 AUTOMATIC GEARBOX )
Engines: NFU - RFJ
C5FP0NZC
C5FP0P0C
SHIFT LOCK.
The «shift lock» is a system that locks the gear selection lever in position «P».
Unlocking the «SHIFT LOCK» (normal operation).
- Switch on the ignition.
- Press the brake pedal and keep it pressed.
- Move the gear selection lever out of position «P».
Unlocking the «SHIFT LOCK» (with an operating fault).
NOTE: It is impossible to unlock the «shift lock» with the «Normal operation»
method.
The fault may originate from one of the following components:
«Shift lock».
- Gear lever position switch.
- Automatic gearbox ECU.
- Electrical harnesses.
- Battery voltage.
Remove:
- The gear lever cover (1) (pull upwards).
- Unlock the «shift lock» by pressing at “a” with the aid of a screwdriver.
- Move the gear selection lever out of position «P».
To Next Page
Loading...
