178
ENGINES
CHECKING AND SETTING THE VALVE TIMING
Engine: RFN
Tools.
[1] Camshaft setting peg : (-).0189.A
[2] Crankshaft setting peg : (-).0189.R
[3] Timing belt retaining pin : (-) 0189.K
[4] Adaptor for angular tightening :4069-T
[5] Hub immobilising tool : (-).0189.S
[5a] : (-).0189.S1
[5b] : (-).0189.S2
Pliers for removing plastic pins :7504-T
IMPERATIVE: Respect the safety and cleanliness requirements.
Checking and setting the timing.
Removing.
Disconnect the negative terminal of the battery (see corresponding operation).
Raise and support the vehicle, front wheels hanging.
Remove the auxiliaries drive belt (see corresponding operation).
Unclip and move aside the fuel supply hose from the timing cover.
Remove the timing cover (1).
Turn the engine by means of the screw (3) of the crankshaft pinion (2) to bring it to the pegging
position.
B1BP2V4C
To Next Page
Loading...
