183
ENGINES
CHECKING THE VALVE TIMING
Engine: RFK
Tools.
[1] Camshaft setting peg : (-).0194.B
[2] Crankshaft setting peg : (-).0189.R
IMPERATIVE: Respect the safety and cleanliness requirements.
Checking the timing.
Removing.
Disconnect the battery negative terminal.
Raise and support the vehicle, front wheels hanging.
Remove the front RH wheel and the splash-shield.
A: Pegging on the manual gearbox.
Tu rn the engine by means of the crankshaft pinion screw, to bring it to the pegging position.
Peg the crankshaft, using tool [2].
Unclip:
- The fuel supply hose from the timing cover.
- The fuel vapour re-induction circuit.
B1BP2V5D
To Next Page
Loading...
