CITROEN C4 2004 - Page 195

192
ENGINES
CHECKING THE VALVE TIMING
Engines: 9HX - 9HY - 9HZ
Tu rn the engine in the normal direction of rotation until the peg [1] engages in the setting hole.
Peg the flywheel at «b», using tool [1].
Move aside the electrical harness (6).
Remove:
- The engine support (7).
- The screw (8).
- The accessories drive pulley (9).
- The lower timing cover (10).
- The upper timing cover (11).
- The tool [1].
- Refit the screw (8).
- Rotate the crankshaft six times (clockwise).
IMPERATIVE: Never turn it backwards.
B1BP305C
B1EP1HJD
UK-C4-page131-237-2004 15/11/04 9:19 Page 192