305
CLUTCH
GEARBOX
DRIVESHAFTS
ML/6 GEARBOX CONTROLS
Engine: RHR
Peform the following operations simultaneously:
- Move the cylinder «f» in the direction of the arrow «e».
- Pull the locking key «c» in the direction of the arrow «d».
Check that the gear lever (18) is in the mid position on the control housing (17).
Couple the ball-joint (19).
Press on the locking key «c».
IMPERATIVE: Check that all the gears engage.
B2CP3ZWD
Adjustment of the gear selection control cable
To Next Page
Loading...
