313
CLUTCH
GEARBOX
DRIVESHAFTS
AL4 AUTOMATIC GEARBOX
Engines: NFU - RFJ
B2CP3EED
B2CP3X8C
Tightening torques (m.daN).
(8) Fixing of converter on diaphragm
- Pre-tightening :1 ±0,1
- Tightening :3 ±0,3
(9) Plug fixing : 0,8 ± 0,2
(10) Gearbox fixing on engine : 5,2 ± 1
Hydraulic block fixing.
Centre the hydraulic block, using screws (11) and (12).
- Pre-tighten (no strict order) : 0,9
- Slacken : All 7 screws
- Tighten (respect the order indicated) : 0,75
NOTE: The screw (11) is shouldered.
To Next Page
Loading...
