74
ENGINES
SPECIAL FEATURES: TIGHTENING TORQUES
Cylinder block
Crankshaft bearing cap cover screw (*)
Pre-tightening 1
22 Tightening 2 ± 0,2
Angular tightening 72° ± 5°
23 Crankshaft bearing cap sealing screw 1
Con rod cap bolt (*)
Pre-tightening 1
24 Tightening 2,3 ± 0,2
Angular tightening 46° ± 5°
25 Knock sensor 2 ± 0,5
Engine: RFJ
B1DP1KSP
(*) = IMPERATIVE: Respect the tightening sequence (see following page).
To Next Page
Loading...
