EasyManuals Logo

Clarion WXZ468RMP Service Manual

Clarion WXZ468RMP
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
- 3 -
WXZ468RMP
Figure 2
Blue/White Blue/White
Remote
turn-on
Auto ant.(A-5)
Insulation tape
Insulate the terminal
Never let the terminals make contact
with the metal plate parts of the car.
*
Initial setting of Ex-lead
Figure 1
Yellow Yellow
Fuse
Red Red
Blue/White
Blue/White
ISO
CONNECTOR
To Main unit
Remote
Fuse
For models 1992 and later
For models up to 1991
Yellow
Red
Yellow
Red
Yellow
Red
Red
NOTES OF ISO CONNECTOR
1. For VW/Audi/Opel/Vauxhall vehicles, change the posi-
tion of fuse installation as shown on the diagram.
(Figure 1)
2. When the car stereo is installed in 1998 and later
Volkswagen models, remove the auto antenna leads (A-
5:Blue/White). Be sure to insulate both the ISO connec-
tor side terminal and the main unit side terminal with
insulation tape, respectively. (Figure 2)
3. When the main unit is also connected to an external am
plifier, connect REMOTE on the external amplifier to re-
mote turn-on lead.
CAUTION
This appilance contains a laser system and is classified as
a "CLASS 1 LASER PRODUCT" . In case of any trouble
with this player, please contact your nearest "authorized
service station" . To prevent direct exposure to the laser
beam, do not to open the enclosure.
Top view
SYSTEM CHECK
This function verifies the devices hooked up through CeNET.
1. Press the [ADJ] button to switch to the adjust mode.
2. Turn the [SEARCH] knob to select "SYS CHECK" .
3. Press and hold the [SEARCH] knob for 1 second or
longer to start the system check.
The digital connection configuration is automatically
checked.
When the system check is complete, the display returns
to the previous mode.
ANTI-THEFT INDICATOR
The red Anti-theft indicator is a function for detering theft.
The disc indicator for the [DIRECT] button "2" blinks.
* The factory default setting is "OFF".
1. Press the [ADJ] button to switch to the adjust mode.
2. Turn the [SEARCH] knob to select "BLINK LED".
3. Turn the [A-MODE] knob to select "ON" or "OFF".
4. Press the [ADJ] button to return to the previous mode.

Other manuals for Clarion WXZ468RMP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Clarion WXZ468RMP and is the answer not in the manual?

Clarion WXZ468RMP Specifications

General IconGeneral
BrandClarion
ModelWXZ468RMP
CategoryCar Receiver
LanguageEnglish

Related product manuals