40
z Auto connect WIFI: Check the box here, system automatically connects to the previous WIFI
hotspot.
z Refresh: You can click it to search the hotspot list again. It can automatically add the
information such as the password if you have set it before.
z Disconnect: Here you can click it to turn off the connection.
z Connect: Here you can click it to connect to the hotspot. System needs to turn off current
connection and then connect to a new hotspot if there is connection of you selected one. See
Figure 4-43.
Figure 4-42
Figure 4-43
After successfully connection, you can see the following interface. You can see it is connected
now. See Figure 4-44.
To Next Page
Loading...