Need help?Do you have a question about the ClearView Network Video Recorder and is the answer not in the manual?
Conformance to electrical safety codes and avoiding electrical shock hazards.
Guidelines to prevent damage during transportation, storage, and installation.
Proper handling, power application, and avoiding objects on the NVR during installation.
Emphasizes that only qualified personnel should perform examination and repair work.
Specifies installation requirements for a cool, dry place away from direct sunlight and inflammable substances.
Advises checking all included components and using manufacturer-recommended accessories.
Warning about improper battery use and the importance of using the correct model for replacement.
Procedure to inspect the NVR for visible damage and check package contents upon receipt.
Refers to the User's Manual for detailed information on front and rear panel ports and buttons.
Instruction to ensure secure connections of data, power, COM, and main board cables.
Critical steps for installing Hard Disk Drives, including power off and recommended HDD types.
Description of the NVR's front panel layout, buttons, and their functions.
Detailed explanation of the NVR's rear panel ports and their respective functions.
Steps for logging into the NVR system, including default accounts and security notes.
Configuration of recording schedules, including periods, record types, and pre-record settings.
Setup of network parameters such as IP version, IP address, subnet mask, gateway, and ports.
Configuration of alarm inputs, event types (local, network, IPC), and activation settings.
Setup for Pan-Tilt-Zoom control, including protocol, address, baud rate, and data/stop bits.
Detailed configuration options for PTZ setup, including channel, protocol, and address.
How to operate PTZ functions like zoom, focus, and iris through the interface.
Management of remote devices, including UPNP, switch setup, and connection procedures.
Configuration for Universal Plug and Play to establish network mapping.
Settings for the built-in switch function, primarily related to PoE ports.
Process of searching, adding, and configuring remote devices like IPCs.
Accessing the remote device interface via a shortcut from the preview.
Viewing detailed information about connected remote devices.
Steps for establishing network connectivity for web access, including IP and PC setup.
Procedure for logging into the NVR via a web browser, including default credentials and security advice.
Introduction to the Quick Configuration Tool for IP address management and device upgrades.
Step-by-step guide on using the Quick Configuration Tool to search and modify device settings.
General| Brand | ClearView |
|---|---|
| Model | Network Video Recorder |
| Category | Recording Equipment |
| Language | English |
To Next Page