ClearView Network Video Recorder - Hardware Installation and Connection; Check Unpacked NVR; About Front Panel and Rear Panel; After Remove the Chassis

1
 +DUGZDUH,QVWDOODWLRQDQG&RQQHFWLRQ
Note: All the installation and operations here should conform to your local electric
safety rules.
 &KHFN8QSDFNHG195
When you receive the NVR from the forwarding agent, please check whether there is any visible damage.
The protective materials used for the package of the NVR can protect most accidental clashes during
transportation. Then you can open the box to check the accessories.
Please check the items in accordance with the list (Remote control is optional). Finally you can remove the
protective film of the NVR.
 $ERXW)URQW3DQHODQG5HDU3DQHO
For detailed information of the function keys in the front panel and the ports in the rear panel, please refer
to the User’s Manual included in the resource CD.
The model label in the front panel is very important; please check according to your purchase order.
The label in the rear panel is very important too. Usually we need you to represent the serial number when
we provide the service after sales.
 $IWHU5HPRYHWKH&KDVVLV
Please check the data cable, power cable, COM cable and main boar cable connection is secure or not.
 +'',QVWDOODWLRQ
Important
˖
Please turn off the power before you replace the HDD.
The pictures listed below for reference only
You can refer to the User’s Manual for recommended HDD brand. Please use HDD of 7200rpm or higher.
Usually we do not recommend the PC HDD.
ķUse 4 screws to secure the HDD
ĸPut the HDD to the HDD box at the front.