59
Secure car seat with vehicle belt:
• Route vehicle belt through the Forward-
Facing Belt Path, taking care not to put
vehicle belt between Harness and back
of seat, and buckle vehicle belt, as
shown in Figure 79.
• Open the Forward-Facing Belt Lock-
off on the same side of the seat as the
vehicle shoulder belt anchor point. Place
the vehicle shoulder belt through the
Forward-Facing Belt Lock-off as shown
in Figure 80.
Step 8
Place car seat in the seating location selected
with the Rigid LATCH Connectors facing the
vehicle seat.
Secure the Rigid LATCH Connectors to the
vehicle LATCH lower anchors by aligning
the Rigid LATCH Connectors with the vehicle
LATCH lower anchors and pressing the Rigid
LATCH Connectors against the LATCH lower
anchors until each Rigid LATCH Connector
locks, as shown in Figure 81.
Figure 79
Figure 80
Figure 81
To Next Page
Loading...
