BIOS Update
C-1
C.BIOS Update
Appendix C:Updating the FLASH ROM BIOS
To update the FLASH ROM BIOS you must:
• Download the BIOS update from the web site.
• Unzip the files onto a bootable Floppy Disk.
• Reboot your computer from the FDD.
• Use the flash tools to update the flash BIOS.
• Restart the computer booting from the HDD.
1. Using your web browser go to
www.clevo.com.tw
2. Choose Download from the menu bar at the top of the page.
3. In the
Driver section select the model of your computer (D400E/D410E Series) and the driver type (BIOS).
4. Select
GO.
5. Click on
D4xE_xxx.zip to download the BIOS files (including BIOS refresh tools).
Unzip the file you have just downloaded on to a bootable floppy disk.
(The files you should see on this disk are: Phlash.exe, autoexec.bat, Platform.bin, D4xE_xxx.ROM & Readme.txt)
1. With the bootable floppy disk containing the BIOS files in your floppy drive, restart the computer.
2. The BIOS refresh process will execute automatically.
3. Reboot the computer and enter the BIOS setup.
4. Exit the BIOS and restore the default settings by choosing “Save and Exit”.
To Previous Page
Loading...
Need help?
General
