Clevo D400E - Removing the LCD and Top Case

Disassembly
2 - 20 Removing the LCD and Top Case
2.Disassembly
Removing the LCD and Top Case
1. Turn off the computer, remove the battery (page 2 - 8), hard disk (page 2 - 9), RAM (page 2 - 10), CD Device (page
2 - 12), Bluetooth module (page 2 - 14), Wireless LAN module (page 2 - 15), CPU (page 2 - 16), keyboard (page 2 -
18) and keyboard shielding plate (page 2 - 19).
2. Remove screws
- , and disconnect cable (Figure 13a) from the bottom off the computer.
3. Remove screws
- (Figure 13b) from the rear off the computer.
4. Remove the LCD cable shielding cover , screws
- and disconnect cables - (Figure 13c).
Figure 13
LCD & Top Case
Removal
a. Remove the screws from
the bottom of the compu-
ter.
b. Remove the screws from
the rear of the computer.
c. Remove the LCD cable
shielding cover and dis-
connect the cables.

26. LCD cable cover
•14 Screws
1 11 12
13 16
21
17 18 19 20
a.
b.
8
7
1 2
5
4
3
6
9
10
11
12
13
b.
c.
14 15
16
19 20
17
18
21