Clevo D400E - Removing the Battery

Disassembly
2 - 8 Removing the Battery
2.Disassembly
Removing the Battery
1. Turn the computer off, and turn it over.
2. Remove screws
& (Figure 1a) from the battery cover , and remove the cover.
3. Carefully (use a small screwdriver) disconnect the battery cable at point
(Figure 1b).
4. Lift the battery out of the computer.
5. When replacing the battery, connect the cable first.

3. Battery Cover
5. Battery
•2 Screws
1 2 3
4
5
1 2
4
a.
5
3
b.
Figure 1
Battery Removal
a. Remove the 2 screws
and the battery cover.
b. Carefully disconnect the
battery cable and remove
the battery.