Modules
Setting Up SATA RAID, Optane™ or AHCI Mode 6 - 11
6
22. Press <F4> and <Yes> to “Save Changes and Reset”, however ensure that the
condition in the bulleted point below is met before doing so.
• Make sure the Windows 10 OS DVD is in the attached DVD drive, as the com-
puter starts up it will automatically boot from the Windows 10 OS DVD (you
will be prompted to press a key to boot from the DVD).
23. Press <F7> as the computer starts up to bring up the boot device menu.
24. Select the DVD drive containing the Windows 10 OS DVD and press <Enter>.
25. Press a key at system startup to begin installing Windows from your Microsoft
Windows 10 disc.
26. Click Next > Install Now to continue installing the operating system as normal
(see your Windows documentation if you need help on installing the Windows
OS).
27. Follow the on-screen instructions to install the Windows 10 operating system.
28. Install the Windows drivers from the Device Drivers & Utilities + User’s Manual
disc as per Table 4 - 1, on page 4 - 4 (make sure you install the Intel Rapid
Storage Technology driver - see overleaf).
29. Run the Intel® Rapid Storage Technology application to manage your RAID
volume as instructed in “Intel® Rapid Storage Technology for RAID Systems”
on page 6 - 63.
To Next Page
Loading...
