ClimateWorx M52 - Component Configuration; Main Board Configuration

Advanced M52 Microprocessor User's Guide
ADVANCED M52UMCT2019 COLOR
40
Data Re-initialization
The data re-initialization page under the {Test mode} tab is as follows:
Clear graph data
Load default settings
Load default alarm configuration
Under this page, you can:
- Set alarm configurations to default configurations (See Alarm Response Summary)
1
.
- Set system configuration and control settings to default configurations (See Setting
Summary)
- Clear log data in temperature and humidity log graph.
1
Not recommended for chilled water units, Series 7 and 11 and units with options.