Need help?Do you have a question about the ClimateWorx M52 and is the answer not in the manual?
Handles phase loss conditions and describes analogue/digital outputs.
Explains compressor staging for cooling and dehumidification demands.
Describes operation of chilled water and free cooling systems.
Details reheat, humidifier functions, and PID control logic.
Covers safety mechanisms, On/Off control, and back-up capabilities.
Displays current date and time in DD/MM/YYYY and HH:mm format.
Shows information corresponding to the currently selected tab.
Provides icons to switch between different functional tabs.
Icons for alarms, fan status, On/Off modes, and Co-Work network address.
Displays current temperature and humidity sensor readings.
Visualizes current system operating status via icons and analogue bars.
Shows the unit's unique network address for communication.
Details Admin, Factory, and User security levels with access rights and passwords.
Instructions for logging into the system via the touch screen interface.
Procedures for logging out and the system's automatic re-locking mechanism.
Viewing active alarms and the procedure for clearing them.
Customizing how alarms are reported and the automated responses.
Default system actions for each alarm message.
Categorizing alarms and logging events for system analysis.
Displays the weekly on/off program with 4 changeover events per day.
Instructions for altering the timer schedule settings and changeover functions.
Procedure for setting the system's date and time via the status screen.
View and modify core system parameters and queries.
Details how to change settings based on security level.
Provides tables summarizing settings across configurations and parameter definitions.
Detailed breakdown of settings for various configurations (Temp, Humid, Control, etc.).
Diagnoses microprocessor and digital boards, including inputs and outputs.
Enables manual On/Off control of unit components.
Re-initializes alarm configs, system settings, and clears log data.
Details DIP switches, LEDs, and terminal assignments for the main board.
Details DIP switches, LEDs, and terminal assignments for expansion boards.
Configuration and addressing for temperature and humidity sensors.
Details switch settings and addressing for the sensor hub.
Details duty sharing, data sync, load activation, redundancy, and step expansion.
Configures inclusion/exclusion of standby sensor data for averaging.
Step-by-step guide for wiring and configuring the Co-Work network.
Describes how alarms are handled and responded to within the network.
Troubleshooting for high/low temperature and humidity alarms.
Troubleshooting for high/low voltage and low airflow alarms.
Troubleshooting for filter dirty, fan overload, heater overheat, boiler dirty, and pressure alarms.
Diagram detailing terminal assignments for the main control board.
Diagram detailing terminal assignments for expansion boards.
Diagram detailing terminal assignments for the color display.
Wiring diagrams for Co-Work interconnection and RS485 communication.
General| Brand | ClimateWorx |
|---|---|
| Model | M52 |
| Category | Computer Hardware |
| Language | English |
To Next Page