22
Before installation
5.4.1.1 Lifting with a crane
Use protective elements to avoid damaging the unit.
1
1
1
1
Protection elements
5.4.1.2 Lifting with a forklift truck
5.4.1.3 Lifting with a crane without packaging
2
2
3
1
1
1
1
!
1 Suitably protect the unit to prevent damage.
2 Use the protection bracket supplied
3 Air probe
During operations, take care not to damage the outdoor
air probe.
When the load is lifted off the ground, stay clear of the
area below and around it.
Identify critical points during handling (disconnected
routes, ights, steps, doors).
Before starting the handling, make sure that the unit is
stable.
The unit may not be tilted more than 15° during tran-
sport.
5.5 Removal of the packaging
On reaching the installation site.
Carry out the following procedure:
► cut the straps
1
1
Straps
► lift and remove the packaging
To Next Page
Loading...
Need help?
General