6
General
2. General
2.1 About the manual
• The manual ensures proper installation, use and mainte-
nance of the unit
• this manual is an integral and essential part of the pro-
duct
• keep this manual together with the wiring diagram in an
accessible place for the operator. It should always accom-
pany the product, even if it is transferred to another
owner or user
• recipients of the instructions in the manual are indicated
in the “Recipients” chapter
• the recipient is indicated at the beginning of each section
of the manual
• recipients, to the extent of their responsibility, are requi-
red to read the instructions and warnings in this manual
as they provide important information on safe installa-
tion, use and maintenance.
Remember that:
• Clivet accepts no liability for damage to persons or pro-
perty resulting from failure to observe the rules in this
manual
• failure to observe the instructions in this manual will
result in forfeiture of the warranty
• Clivet reserves the right to make changes or improve-
ments to this documentary material and to the units
without prior notice
• visit the manufacturer’s website for up-to-date details
• this manual contains proprietary information, all rights
reserved, it may not be reproduced or photocopied,
either in whole or in part, without the prior written con-
sent of Clivet.
2.1.1 Symbols
The symbols in the following chapter can be found in the
manual and on the product, and provide quick and clear
information for correct and safe use.
2.1.1.1 Safety symbols
Danger
This symbol indicates warnings, failure to comply may
result in serious harm to health and fatal injuries.
Warning
This symbol indicates warnings, failure to comply may
result in irreparable damage to the product or harm
to the environment.
Prohibition
This symbol indicates operations that must never be
carried out.
Note
This symbol indicates important information.
2.1.1.2 Editorial symbols
In the texts
Purpose of the action: indicates the purpose of a sequence
of actions.
(it is identified by bold text followed by :)
► this symbol indicates actions that are required
○ this symbol indicates the expected result after an action
• this symbol indicates the lists
In the images
uniquely indicates a component
indicates a group of components
indicates a sequence of actions
In the images, dimensions are expressed in millimetres
unless otherwise indicated.
2.1.1.3 Symbols on the unit
The following symbols are used in some parts of the product:
Caution flammable material:
The refrigerant gas is flammable and odourless.
Do not place it near continuously operating ignition
sources (naked flames, gas appliances, electric stoves,
lit cigarettes, etc.).
Instructions for the User
Read the User Manual carefully before using the
product.
Instructions for the User
Read the Installer Manual carefully before installing
the product.
Instructions for the Technical Support Service
Read the Technical Support Service Manual carefully
before carrying out any operation on the product.
To Next Page
Loading...
