CLIVET WiSAN-YME 1 S 4.1 User Manual

130
Control
The unit is switched on as follows:
Operation of the control unit according to the schedule:
TIME Control unit operation
1:00 DHW mode is switched ON
3:00 DHW mode is switched OFF
7:00 Heating mode is switched ON
9:00 Heating mode is switched OFF
11:30 Cooling mode is switched ON
13:00 Cooling mode is switched OFF
14:00 Heating mode is switched ON
15:00 Cooling mode is switched ON and Heating mode is switched
OFF
16:00 Heating mode is switched OFF
18:00 DHW mode is switched on
19:00 Cooling mode is switched OFF
23:00 DHW mode is switched OFF
NOTE
If the start time and the end time are the same in the same
time schedule, the TIMER function is not valid.
9.16.2 Weekly schedule
If the timer is on and the weekly schedule is o, the most
recent setting is valid.
If the WEEKLY SCHED. function is on,
7
is displayed on the
home page
Select
MENU > SCHEDULE > WEEKLY SCHED.
Press OK
Select the days of the week you wish to schedule.
Press LEFT or RIGHT to scroll through the days, press OK to
select or deselect the day.
If the day appears as “ MON ”, it means that it is selected. If it
appears as “ MON ”, it means that it is deselected.
NOTE
To enable the WEEKLY SCHED. function, at least two days
must be scheduled.
TIME SCHEDULE
TIMER
WEEK.
SCHED.
SCHED.
CHECK
CANCEL
TIMER
MON TUE WED THU FRI SAT SUN
CONFIRM CANCEL
OK
SELECT MON
ACS
1:00 3:00 7:00 9:00 11:30 13:00 14:00 15:00 16:00 18:00 23:30 19:00
CALDO FREDDO CALDO ACS FREDDO
Fig. 119
DHW HEAT COOL HEAT COOL DHW

CLIVET WiSAN-YME 1 S 4.1 Specifications

General

Brand	CLIVET
Model	WiSAN-YME 1 S 4.1
Category	Heat Pump
Language	English