21
Before installation
HANDLING WITH A CRANE
Pass the straps for slinging the unit through the holes provided on the wooden packing pallet.
Lift carefully and avoid sudden movements.
Position the unit close to the installation site.
HANDLING WITH A FORKLIFT TRUCK
The unit can also be moved with a forklift truck using the holes provided on the base of the wooden pallet.
Fig. 8
4.4 Removing packaging
Once you have reached the installation site, remove the wooden pallet by unscrewing the screws at the
base of the unit, the packaging cardboard and the coil protection (1).
Fig. 9
To Next Page
Loading...
Need help?
General