CLIVET WiSAN-YME 1 S 4.1 User Manual

137
Control
If a start time is set later than the end time, or a temperature
outside the allowed range is set for the chosen operation
mode, the following page appears.
OPTIONS
SILENT
MODE
HOLIDAY
AWAY
HOLIDAY
AT HOME
BACKUP
HEAT
Timer 1 not required
The start time is the same as the end time.
OK
CONFIRM
NOTE
The HOLIDAY AWAY or HOLIDAY AT HOME functions must
be set again if you change the unit's operation mode.
9.17.4 Backup heater
Available as an accessory or configuration
The BACKUP HEATER function is used to force the backup
heater on.
Select
MENU > OPTIONS > BACKUP HEATER
Press OK
If IBH and AHS are not enabled by the Dip-switches on the
main hydraulic module control board, the following page
appears.
IBH= indoor unit backup heater.
AHS= additional heating source.
OPTIONS
SILENT
MODE
HOLIDAY
AWAY
HOLIDAY
AT HOME
BACKUP
HEAT
If IBH and AHS are enabled by the Dip-switches on the main
hydraulic module control board, the following page appears
Use ON/OFF to select ON or OFF.
NOTE
If AUTO mode is on for room heating or cool-
ing, the BACKUP HEATER cannot be selected
The BACKUP HEATER function is invalid if only ROOM HEAT-
ING MODE is enabled.
OPTIONS
SILENT
MODE
HOLIDAY
AWAY
HOLIDAY
AT HOME
BACKUP
HEAT
BACKUP HEATER ON
ON/OFF ON/OFF
9.17.5 Child lock
The Child lock function prevents children from misusing the
unit.
This function locks or unlocks selection of the operation mode
and temperature control.
Select
MENU > CHILD LOCK
Enter the password.
CHILD LOCK
Enter password :
000
OK
CONFIRM EDIT

CLIVET WiSAN-YME 1 S 4.1 Specifications

General

Brand	CLIVET
Model	WiSAN-YME 1 S 4.1
Category	Heat Pump
Language	English