20
Before installation
4. Before installation
4.1 Reception
Before accepting the delivery, check:
• that the unit has not been damaged during transport;
• that the materials delivered correspond with that indicated on the transport document, comparing the
data with the identification label positioned on the packaging.
In case of damage or anomaly:
• immediately take note of the damage discovered on the transport document and write: “Accepted with
reservation due to evident shortages/damages during transport”;
• contest by fax and registered mail with proof of receipt to the supplier and carrier.
L
NOTE
Any disputes must be raised within 8 days from delivery. Complaints after this period are invalid.
4.2 Storage
Observe external packaging instructions.
In particular:
• minimum room temperature -10°C (possible damage to components);
• maximum room temperature +50°C (possible pressure relief valve opening);
• maximum relative humidity 95% (possible damage to electrical components).
L
NOTE
The unit may not be tilted more than 15° during transport.
4.3 Handling
W
CAUTION
– Check that all handling equipment complies with the local safety regulations (cranes, forklift trucks, ropes,
hooks, etc.).
– Provide personnel with personal protective equipment appropriate for the situation, such as hard hat,
gloves, safety shoes, etc.
– Follow all safety procedures to ensure the safety of personnel and materials.
– To avoid injury, do not touch the unit’s air inlet or aluminium fins.
– Do not use the fan grille handles to move the unit.
– Handle the unit with equipment appropriate to its weight (see paragraph “4.6 Dimensions and weights”
on page 22).
– Keep the unit packed during handling. Do not remove the packaging until these operations are completed.
To Next Page
Loading...
Need help?
General