MAN.241 Rev.5 ENG - Use and maintenance manual S23 page 22 of 127
• the power supply is signaled by the lighting up
of the green led 5 (Picture 4) on the switching
on/off station.
To switch off the electric engine*, it will be enough to
alternatively:
• turn the SK key all the way to the left on posi-
tion 0;
• lower the lever mentioned above on the ra-
dio/wired control;
• press, in emergency situations, one of the
emergency buttons provided on the machine
(par. 4.5.1).
3.1.3 Other power supplies (*optional)
The MEWP can also be equipped with a power sup-
ply selector capable of providing electric motor’s dual
power supply at 110 V and 230 V. The desired one
can be set thanks to a special electric selector (Pic-
ture 7a - *optional) fixed to the frame.
Picture 7a: voltage selector (*optional).
This allows you to have electrical outlets of both volt-
ages (Picture 7b): on the ground to power the electric
motor and/or in the basket (*optional) to power work
tools. Note that basket’s supply voltage is not setta-
ble and is provided according to customer’s need.
To Next Page
Loading...
