EasyManuals Logo

CNC PYTHON XPR User Manual

CNC PYTHON XPR
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background image
26
AUTO vs SIMULATION Mode
AUTO vs JOG Mode
Auto Mode
Simulation Mode
Simulation Mode
Auto Exclusive Operations Jog Exclusive Operations*
Each operation in Auto Mode contains a sequence of instructions for different parts.
A simulation of the Auto function. If you click on Simulation while the machine is performing an operation on Auto
mode, it will pause that operation. You may then use the MPG remote to manually go forward or go in reverse for
that operation’s sequence, one movement at a time.
Think of Simulation Mode as pausing a video, and then moving the slider left or right to rewind or fastforward the
clip one frame at a time.
Lets you control different parts independently, manually. If you just want to control the Unloading arm movement,
switch to Jog Mode.
Buttons of individual parts can only be activated when in Jog Mode.
*These, however, are activated in Auto mode if they are
part of an automatic sequence.
The following are operations that work only
in Auto Mode:
Material Alignment
Resurface Spoilboard
Table Clean
Auto Tool Measure
The following are operations that work only in
Jog Mode:
Spindle warm up
Drill Cylinder [requires upgrade]
Drill On [requires upgrade]
Spindle Forward
Block Offset [requires upgrade]
IN THE UTILITIES PAGE
IN THE ADVANCED PAGE
Example: [Auto] Unloading instructs the router to:
Turn off the vacuum flow
Travel to the end of the material
Start the unloading table
Drop the unloading arm
Activate the dust extraction suction
Push the material towards the unloading table
Raise the location pins after pushing all materials to the unloading table

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CNC PYTHON XPR and is the answer not in the manual?

CNC PYTHON XPR Specifications

General IconGeneral
BrandCNC
ModelPYTHON XPR
CategoryIndustrial Equipment
LanguageEnglish

Related product manuals