39
Run Screen
Shows the G-code of your current file as well as repeats information from the Main Screen.
Run Time: Running time of the current file
Accu. Time: Accumulated or total running time of the
router. It goes back to zero whenever the router is reset or
by pressing [F8 Clear Accum. Cycle Time]
You can preview your tool path here by
pressing [F2 Simulation Switch]
Information you
can reference when
editing G-code
Your G-code will
appear here
F1 Edit
To edit the G-code for advanced users.
Keyboard commands:
• Arrows to move the cursor
• [Page Up] & [Page Down] to
switch pages
• [Home] and [End] to bring the
cursor to the start or end of a
line
To Next Page
Loading...
Need help?
General
