CoachComm X SYSTEM - Page 66

OPERATING MANUAL
800.749.2761 www.coachcomm.com
60
Customizing Prole Groups
Use the procedures below to use the Prole Group feature of X-Ware.
1. Open X-Ware and access the Advanced Settings window.
Note: You can add a Group to a “live” system or to an “ofine” system. If you make the change while
ofine, you’ll have to rst open a saved .ccf le to edit.
2. Click the Group Management Tab. This tab displays a list of the X-Ware groups available to any proles in the
open system conguration le.
3. Click the Add Group button in the bottom left corner of the screen. A new prole group will
appear in the list.
4. Double-click on the newly created group. The group’s detail screen will display.
5. Click in the Group Name eld and type a new name for the group.
Figure 81: X-Ware Group Management Tab
Figure 82: Add Group Button
Figure 83: X-Ware Group Detail Screen